RowQuilt.gif (28777 bytes)

JoinUs2.gif (15209 bytes)

Row Quilt

Straight layout

Block Setting –  Sampler

Size: 79" w X 101½" h

 

 

Back to lessons.gif (1669 bytes)

The Row Quilt is made up of rows of a single block,
which may or may not be repeated in another row.  As you see in the illustration
above the House block Row is the only one that is repeated. All the blocks in the
row are either all the same or made up of scraps.  Many times the Row Quilt is
composed of various blocks received in a block swap. Before beginning this
lesson jump down to the sash section to to download the sash file. Please read the
download instructions at the end of the lesson.

The layout:

Layers: We will begin this quilt
without Layers. If you do NOT have the layers enabled you may skip to the next
paragraph. With only the work area showing, right click on the Layer buttons. 
From the flyout menu, select Collapse Layers.

From the Layout menu select Quilt. A
Quilt Layout dialog box appears. The quilt preview will show the default quilt layout on
the upper right hand side of the dialog box, as well as the quilt measurements for this
setting. While you are adjusting the quilts using the instructions below, notice the
measurement changes as you make changes to the quilt. However, wait until you
are done with all adjustments before determining if the quilt size is correct. If at the
end of all your adjustments the size is incorrect then review the all the layout screens
to be sure they match up with the numbers shown below.

Adjust the block settings:

  1. Select Straight from the Layout arrangement box.
  2. Change the Block Count to: Across 5, Down 6
  3. Change the Block Size to: Width and Height 12"
  4. Change the Block Setting to: Sampler

Clear medallion rings:

  1. If your current layout indicates you have no rings, go on to adjust
    borders. 
  2. If your screen should indicate that the quilt has rings, click Clear
    All Rings.

Add borders to the quilt:

  1. Select the Borders tab and border settings appear.
  2. Add borders to your quilt by clicking on the Add Borders button until
    the dialog box indicates Quilt has 2 borders.

Adjust borders:

  1. Select 1 in the Current Border box.
  2. Change the Border type to: Corners
  3. Change the Horizontal and the Vertical Fittings settings to: Specific
    Count, Width 8 ", Count – 1.
  4. Select 2 in the Current Border box.This border allows you to see
    what a large binding will look like.
  5. Change the Border type to: Corners.
  6. Change the Horizontal and the Vertical Fittings settings to: Specific
    Count, Width 1.5", Count 1.

Add sashes:

  1. Select the Sashes tab, and Sash settings appear.
  2. Click both Enable Inner and Outer Sash box.
  3. Adjust the Inner sash height = 1.50" and width
    0.00". This means we will not have a vertical sash.
  4. Adjust the Outer sash Vertical  = 0.00 "and Horizontal
    1.50".

The quilt should now measure 79" w X 101½" h. If the
measurements in your quilt are the same, click the OK button. If the measurements are off
then return to the settings indicated above. The blank straight setting layout will
appear, as shown below.

RowQltGrid.gif (5734 bytes)

 

Adding Blocks, Sashes and Borders to the Quilt.Placing blocks in the quilt

  1. Add blocks to the row quilt is the same as adding blocks to any other
    sampler quilt.
  2. Place the mouse cursor over the block section and click the right
    mouse button. A flyout menu appears.
  3. From the flyout menu, select Browse Blocks. The block browser
    appears.
  4. Expand the block folder by clicking on the (+) sign in the Explorer
    pane.
  5. Locate the blocks in the folders indicated below.  Drag the
    block over to the correct row and drop it in place. Continue with the same block until all
    five positions are filled.
  6. Go on to the next row and next block, until all rows are filled.
  7. Paint the blocks as shown below. The Color and Fabric Palette are
    named below.

RowTrees.gif (9391 bytes) Folder: Pieced Trees

Block name: Pinetree on Point

RowHouses.gif (10543 bytes) Folder: Picture Blocks

Block name: House # 3

RowBaskets.gif (9428 bytes) Folder: Pieced Baskets

Block name: Basket # 3

RowSues.gif (8731 bytes) Folder: Applique\Sun Bonnet Sue & Friends

Block name: Sunbonnet Sue

RowTulips.gif (10180 bytes) Folder: Paper

Block name:  Paper Tulip on Point

 

Click to download 12insash.exe
Adding a pieced sash to the quilt.

The sash used in this quilt is not in your sash
library.  You may design the sash yourself if you’d like using a 12" X 2"
sash grid.  Each square is 1 inch. Or you may download the sash file by clicking on
the sash image where indicated. Please read the downloading
instructions
at the bottom of the page. Once the sash file is in your sash folder
continue on.

  1. Place the mouse cursor over the sash section and click the right
    mouse button. A flyout menu appears.
  2. From the flyout menu, select Browse Sashes. The browser appears.
  3. From the sash folder, select 12 inch check.sas.  Drag and drop it into the inner
    sash grid on the quilt.
  4. Then drag and drop it into the outer sash grid on the quilt.
  5. Paint the sash as shown in the image.

 

Adding a pieced border to the quilt.

RowBorder.gif (5890 bytes)The
border used in this quilt is in your border library. 

  1. Place the mouse cursor over the border section and click the right
    mouse button. A flyout menu appears.
  2. From the flyout menu, select Browse Borders. The browser appears.
  3. From the border folder, select Nine
    Patch Corners.bor. 
    Drag and drop it into the inner border grid on the
    quilt. The border fitting dialog box appears. Make no changes to the information, just
    click the Ok button.
  4. Paint the border as shown.
  5. Paint the outer border the same shade of blue as the middle
    strip in the inner border.

 

Save your Quilt design.

  1. From the File menu, select Save.  Your design is now complete

Palette Information:

Solid Color Palette:

The Handdye2.pal solid color palette was used to color this quilt.

  1. To open the palette place your mouse cursor over the solid color
    palette and click the right mouse button.
  2. From the flyout menu, select Open Palette.
  3. From the list of solid color palettes choose Handdye2.pal,
    then click Open.

Fabric Palette:

The Small Patterns.fpl fabric palette was used to
color this quilt.

  1. To open the palette place your mouse cursor over the current fabric
    palette and click the right mouse button.
  2. From the flyout menu, select Open Palette.
  3. From the list of fabric palettes choose Small Patterns.fpl,
    then click Open.

 

Downloading the Quilt Pro sash file: Because most browsers read Quilt Pro block, border, and sash files
as text files they have to be placed in a compressed format.  To make life easier, I
made this file a self-extracting file.  This means that all you need to do is
double-click the file to cause it to pull out the Quilt Pro sash file.   Wherever you
save this self-extracting file is where the sash file will be once extracted.  You
may then move the file into the Quilt Pro sash folder.   You may also place the
self-extracting file in the sash folder before extracting the sash file.  Note: 
The self-extracting file 12insash.exe is NOT a
Quilt Pro file and you will receive an error message if you try to use this file
anywhere in Quilt Pro.
The sash file is named : 12 inch
check.sas.

Back to lessons.gif (1669 bytes)